MACROLANE™ VRF-30

MACROLANE VRF-30 (10 ml) is a hyaluronic acid-based dermal filler developed and manufactured by the Swiss company Q-Med. The filler has the form of transparent sterile gel created after the dedicated NASHA™ technology. The hyaluronic acid in the gel is of non-animal origin, sterile, with neutral pH (6.0-7.5), and relatively large particles. The properties of the gel make it a viable option for non-surgical body sculpting and augmenting. The gel is mostly used for restorative purposes after liposuction or natural loss of volume in tissues, and it can also be used for body enhancement with aesthetic purposes. This grade of gel is intended for use in areas with greater skin thickness. The product is not intended for use in facial layers of derma.

Every official MACROLANE VRF-30 supplier sells the product as is, pre-loaded into sterile syringes, and accompanied by a usage manual. The syringes are Luer-lock, 10 ml in volume, and intended for single use only. Storing and re-using the product remaining in the syringe after injection is strictly forbidden. When selecting the cannula for a procedure, make sure that it fits the syringe hub.

The working principle of the product is based on the ability of hyaluronic acid to absorb and retain water. When injected into hollow areas, the gel absorbs moisture and holds it within the dermal layers, thus maintaining the plump and smooth external appearance of the enhanced area. This acid is a natural component of the human body that degrades over time. It means that the product maintains the desired body shape through natural processes, in ways safe and neutral to the body. Because of gradual product degradation over the course of time, repeated injections may be required.

Warning: although MACROLANE VRF-30 ingredients are the same as in gels used as a facial dermal filler, the size of its particles is larger, which makes it unsuitable for thin layers of facial skin. The thickness of the skin fold is a key determinant of the possibility of treatment. Sufficient support and coverage by skin tissues are the prerequisites for the product’s injections.

The example areas suitable for injections are the buttocks, calves, thighs, hollow chest, and other areas that meet the requirements. Although breasts correspond to the recommended conditions, it’s not advisable to use the gel for implantation because of possible side effects. Other applications need to be discussed individually with a healthcare provider. The MACROLANE VRF-30 cost and composition make it a safe and viable alternative to minor aesthetic surgery interventions.

The intended effect of using the MACROLANE VRF-30 filler is augmenting, enhancing, and sculpting relatively large areas of the human body that have been void of volume or smooth surface due to fast weight loss or liposuction. Body enhancement because of aesthetic reasons is also among its intended effects. the gel is intended for use in deep tissues, where the skin thickness is at least 1 cm. MACROLANE VRF-30 has larger molecules of HA, which makes it suitable for working with deeper tissue layers and larger areas to fill.

Side effects may be various symptoms of mild irritation. One of the unintended effects is the possible interference of breast gel implants with the mammography results. It is the reason why today it’s not recommended to use the gel for breast enhancement.

Erectile dysfunction cases were also reported after using the gel for penis enhancement. Consultations with a physician are necessary before a patient requests such an intervention.

The key reason to buy MACROLANE VRF-30 online and use it for treating patients is that it works as a mild alternative to aesthetic surgical implantation. The gel with larger particles size is effective for filling larger hollow or uneven areas or enhancing the body shapes for the desired aesthetic effect. The gel with VRF-30 grade is not suitable for face tissue augmentation.

The possible areas of enhancement include calves, buttocks, chest, arms, thighs, and other areas at the discretion of a doctor and a patient.

Every human body has unique reactions to medical substances and interventions, and the use of the product is not an exception. MACROLANE VRF-30 ingredients are manufactured with all precautions and according to the latest technological advances, yet it may cause common reactions to mechanical interventions.

They may be (isolated or in an aggregate) tenderness, swelling, itching, or bruising of tissues at the injection area, as well as mild pain. Inflammation or signs of infection should be reported and treated immediately. Pain and visual tissue changes should disappear naturally after two weeks. Encapsulation of the injected gel is a normal process of implant formation.

If patients have higher levels of keloid formation, they may experience scarring at the injection site, and anticoagulant therapy can cause excessive bleeding/bruising. Please inform a medical professional about these conditions before the procedure.

A patient’s organism may develop individual intolerance to the gels made by NASHA™ technology (rare, but not impossible condition).

If an injection is made at the exact site of previous injections (i.e. the scar is open and used for injection), the risk of infection increases.

Certain body areas are more likely to develop side effects and post-treatment complications (up to tumor formation). The given areas should be carefully examined and evaluated individually before the procedure.

The product is developed under the top safety requirements and medical standards. However, in individual cases due to the peculiarities of the human body, a newly injected gel can relocate under the skin layers, retain partial mobility, or create uneven lumps. Each case should be evaluated and treated accordingly.

Gel leakage through the injection channel is also possible, although rare.

When used for breast augmentation, the gel can form lumps that interfere with mammography.

Such adverse effects as granuloma, delayed infection, or hyperpigmentation are also possible.

MACROLANE VRF-30 hyaluronic filler is designed to be used in clinical settings only and to be injected by trained professionals who have also consulted the Q-Med representatives for detailed instructions and hands-on training (preferably). In any case, specialists who will carry out the procedure should have ample experience with similar injections and be prepared to run pre- and post-procedural treatment as well. The following information is generalized and provided for brief familiarization only. Detailed explanations are provided in the booklets specifically compiled and provided by the MACROLANE VRF-30 manufacturer.

The injection of the filler is to be performed through a small incision or a needle stab, so the surrounding area is to be cleaned with the preferred antiseptic and draped with sterile medical-grade material.

If large amounts of the product are to be injected, the pre-treatment with antibiotics may be advised (at the discretion of a physician).

Local or general anesthesia/sedation may be applied after the assessment of the patient’s condition and preferences. For local anesthesia at the injection site, a 0.5% lidocaine with epinephrine injection is recommended.

Injection process: the product is to be injected through a cannula into a small incision (made by a syringe needle or a light stab of a scalpel). Carefully mount a cannula on a pre-filled syringe. Remove air (if any) from a syringe till you can see a gel drop on the cannula tip.

Inject the filler into deep subcutaneous fatty layers of tissue. Assess the skin fold thickness to determine the area suitability for treatment (for MACROLANE VRF-30 it should be thicker than for MACROLANE VRF-20). Inject the filler in small quantities gently pulling the cannula outwards while depositing the gel. The filler should not be injected as one solid deposit to avoid lumping or other adverse effects. After the gel is injected, it is possible to massage the filled area lightly to smooth the surface and make it match the surrounding body area.

The gel should get pushed from the syringe easily, without hard pressure. If hard pressing is necessary, check the syringe or cannula for proper functioning. Reposition the cannula or pick another kit of syringes and cannula for the procedure. Injecting too close to the skin surface may result in visible lumps. Gently push the product out of the injection channel before its final closing. Press its walls together by hand and apply a stitch or a strip to hold it together, if necessary. The sterile dressing of the incision area is necessary.

If not the whole load of product in the syringe was used, it should not be reused afterward because of contamination concerns, and the partially filled syringe is to be discarded in line with safety protocols.

The product is intended for use by trained clinicians who have qualifications in surgery and profound knowledge of human anatomy. It is to be purchased and used in the clinical setting by licensed medical workers, including plastic surgeons, aestheticians, and physicians who had special training in body augmenting injections and accompanying procedures.

The use of the product is to be conducted in line with sterility protocols, and post-treatment procedures are to be observed. The use of the product by people without special training and experience, as well as performing/undergoing the procedure in unsafe settings may result in serious health damage and severe adverse effects for a patient.

Every human body is unique in its reaction to this product, and the treatment effect can last differently for different patients. The average reports mention longevity that reaches up to 12 months, some reports record the longevity of 18 months. Yet a shorter ‘expiry date’ is also possible, which should not cause serious worries in patients. The product is fully natural and degradable, so over time, the effect will be less visible. To maintain the desired effect, additional treatment with the product may be undertaken over time. MACROLANE VRF-30 price makes repeated procedures accessible and affordable.

First of all, the patients should be warned against holding unrealistic expectations related to the use of the product. The filler functioning is based on the natural properties of hyaluronic acid to absorb and retain water, thus creating a reasonable plumping and filling effect.

MACROLANE VRF-30 reviews confirm that the product is suitable for successfully filling and augmenting large areas of the body, including buttocks, calves, hollow chests, and other areas with a suitable thickness of skin fold. The effect will be visible immediately, yet for full recovery and disappearance of side effects, the same time will be required.

The visual comparison of MACROLANE VRF-30 before and after conditions confirms its efficiency in filling larger areas, yet it is not a complete alternative to plastic surgery. There are medical limits to its capacities, and overdosing is not recommended.

Since the injection requires a small surgical intervention, special attention should be paid to aftercare. The following are general recommendations that are to be adjusted or revised according to the actual conditions and patient’s needs.

Right after the injection, while the hyaluronic implant has not congealed and attained its stable shape yet, unintended product relocation may happen. To avoid it, clothing with a mild degree of support may be recommended, and intense physical activity with excessive movement should be avoided (like jogging, jumping, etc.) for about two weeks. To reduce the risk of infection, please keep the place of injection dry and covered for a couple of days.

If you purchase the product from the authorized MACROLANE VRF-30 wholesaler, you may be assured that you buy a high-quality product that is safe for patients and made in compliance with requirements for medical supplies and equipment. The product as such consists of sterile hyaluronic acid (non-animal origin only) that has been processed under the proprietary NASHATM technology. When used by medical professionals as intended, the product is safe.

MACROLANE VRF-30 consists of stabilized non-animal hyaluronic acid. It is a transparent gel with a relatively larger HA molecule size, which makes it suitable for the treatment of larger body areas. The product is pre-packed into sterile syringes and is ready to use.